Siemens SIPROCESS GA700 간결한 사용 설명서 - 페이지 15

{카테고리_이름} Siemens SIPROCESS GA700에 대한 간결한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIPROCESS GA700 24 페이지. Continuous gas analysis

Commissioning, operation, maintenance and

servicing

6.1

Loss of degree of protection

Damage to device if the enclosure is open or not properly closed. The type of protection

specified on the nameplate is no longer guaranteed.

• Make sure that the device is securely closed.

Commissioning and operation with pending error

If an error message appears, correct operation in the process is no longer guaranteed.

• Check the gravity of the error.

• Correct the error.

• If the error still exists:

Violation of the maximum permissible operating pressure

Danger of injury or poisoning.

The maximum permissible operating pressure depends on the device version and the pressure

and temperature limits. The device can be damaged if the maximum permissible operating

pressure is exceeded. Hot, toxic and corrosive process media can be released.

•

• Take note of the information on the nameplate and/or in the technical specifications of the

Safety instructions

Compact Operating Instructions, 09/2018, A5E45779403002-01

CAUTION

WARNING

– Take the device out of operation.

– Prevent renewed commissioning.

WARNING

Ensure that the maximum allowable operating pressure of the device is not exceeded.

manual/operating instructions of the respective device!