Siemens SIREMOBIL Compact L 사용 설명서 - 페이지 7

{카테고리_이름} Siemens SIREMOBIL Compact L에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIREMOBIL Compact L 21 페이지.
Siemens SIREMOBIL Compact L에 대해서도 마찬가지입니다: 설치 및 설정 지침 매뉴얼 (28 페이지), 설치 및 설정 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지)

페이지 인쇄

Replacement of the 15" LCD Color TFT Display

ENTER

Selects the available sub menu or parameter.

If the parameter was changed, the enter key confirms the selected value and returns to

the previous displayed OSD menu.

UP / DOWN

If the OSD menu is inactive (not visible), pressing the key selects the automatic search of

a video signal at the video input connectors.

If the OSD menu is active, pressing the key up or down scrolls though the available menu

items of the OSD menu (highlighted in blue)

or changes the available parameter value (if highlighted in red).

Troubleshooting

External switched-mode power supply

•

Measure the output voltage, printed on the external switched-mode power supply.

•

It can also be checked by swapping the low voltage connectors from one to the other

installed TFT display.

TFT Display

•

Depending on the malfunction, ensure that the display is the defective part.

NOTE

- Check the switched-mode power supply.

- Check the connectors (low voltage input, video signal input)

- Check the video signal of the MEMOSKOP with the SMPTE test pattern

(300mV Sync +/- 10%, 1Vss +/- 10% (in 100% peak white field)).

- Check the input selection switch (at the bottom side of the TFT display).

The switch can be set in 3 positions:

1. Position to the rear: VGA input selected

2. Middle position: BNC-Input selected, 75Ohm termination resistor is off.

3. Position to the front: BNC input selected, 75 Ohm termination resistor is on.

- Check the settings of the on screen menu, in accordance with the user manual.

Siemens AG

Medical Solutions

The TFT display includes no repairable parts and has to be

changed completely if defective.

SPR2-130.841.03

Rev. 02

Page 7 of 20

06.05

CS PS 24

Siremobil Compact L