Siemens SIREMOBIL Iso-C 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Siemens SIREMOBIL Iso-C에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIREMOBIL Iso-C 6 페이지.
Siemens SIREMOBIL Iso-C에 대해서도 마찬가지입니다: 설치 및 설정 지침 (4 페이지), 서비스 지침 매뉴얼 (16 페이지), 설치 및 설정 지침 매뉴얼 (6 페이지), 유지 관리 지침 (46 페이지)

Installation and Startup

Fig. 1

Mechanical installation

WARNING

Note

•

Open the paneling of the logbook compartment.

•

Open the rear paneling of the monitor trolley.

•

A protective plate pointing towards the keyboard is installed inside the logbook compart-

ment. Unscrew this plate. Thus, the On/Off button is accessible.

•

Mark the drill hole according to Fig. 1.

•

Drill a 3.5 mm hole at the marked position (Fig. 1).

•

Increase the hole diameter to 22 mm with the step drill (Fig. 1).

•

Remove the remaining drilling chips in the monitor trolley with a vacuum cleaner.

Siemens AG

Medical Solutions

Avoidance of light to serious injuries which may even lead to

death and avoidance of material damage.

Prior to performing the retrofit work, disconnect the system from

the power supply, and pull out the power plug.

Drill slowly. Make sure that during this process the step drill is

held at a right angle.

Collect the drilling chips inside the monitor trolley with an appro-

priate pad (such as cloth or plastic foil) to avoid short circuits due

to metal chips.

SPR2-130.812.06

Rev. 01

Fig. 2

Page 3 of 6

12.02

CS PS 24

SIREMOBIL

System Manual