Siemens SITOP UPS501S 사용 설명서 - 페이지 8
{카테고리_이름} Siemens SITOP UPS501S에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SITOP UPS501S 8 페이지. Basic unit, expansion module
페이지 인쇄
Vorschriften / Standards:
ATEX
6EP1933-2EC41 / 6EP1933-2EC51:
II 3G Ex nA nC IIC T4 Gc
WARNING: SEPARATE EXPANSION MODULE IN NON-HAZARDOUS AREAS ONLY!
Harzardous Areas: An enclosure / cabinet rated min. IP54 must be provided in the final installation.
The enclosure / cabinet must be in accordance with the requirement of EN 60079-0:2009 and/or EN60079-15:2010
DIP switches shall not be used in operation or while a hazardous area may be present
Only locking USB-cable type (Partno: Y-Con IP20LOCK-104 cable assy Distributor: Yamaichi) shall be used
WARNUNG
ANSCHLÜSSE NUR IN NICHT-EXPLOSIVER UMGEBUNG TRENNEN!
SCHALTERBETÄTIGUNG NUR IN NICHT-EXPLOSIVER UMGEBUNG DURCHFÜHREN!
Der Signalstecker darf in Ex Bereichen nur mit zusätzlicher Befestigungen verwendet werden um der EN 60079-15 zu genügen.
WARNING
SEPARATE TERMINALS IN NON-HAZARDOUS AREAL ONLY!
ACTUATE SWITCHES IN NON-HAZARDOUS AREAS ONLY!
The signal plug must not be used without additional fixings in explosive atmospheres to fulfill the requirements according EN 60079-15.
6EP1935-5PG01:
II 3G Ex nA IIC T4 Gc
WARNING: SEPARATE EXPANSION MODULE IN NON-HAZARDOUS AREAS ONLY!
Harzardous Areas: An enclosure / cabinet rated min. IP54 must be provided in the final installation.
The enclosure / cabinet must be in accordance with the requirement of EN 60079-0:2009 and/or EN60079-15:2010
WARNUNG
ANSCHLÜSSE NUR IN NICHT-EXPLOSIVER UMGEBUNG TRENNEN!
WARNING
SEPARATE TERMINALS IN NON-HAZARDOUS AREAL ONLY!
© Siemens AG 2016
A5E38474162, 08.2016
© Siemens AG Österreich, AT-1210 Vienna, Austria. All rights reserved.
Availability and technical specifications subject to change without prior notice
8 von 8
Liefermöglichkeiten und technische Änderungen vorbehalten
SITOP UPS 500S
SITOP UPS 501S