Siemens SIWAREX R 사용 설명서 - 페이지 37

{카테고리_이름} Siemens SIWAREX R에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAREX R 38 페이지. Mounting units for sb series
Siemens SIWAREX R에 대해서도 마찬가지입니다: 사용 설명서 (34 페이지)

페이지 인쇄
Siemens SIWAREX R 사용 설명서
5

Grounding Cable

5.1

Technical Description

5.1.1. Area of Application

The grounding cable is used for protecting the load cells from unwanted currents. These
currents could be cause by e.g.:
•
as equalization currents for missing or faulty, voltage equalization lines,
•
a lightning bolt in the vicinity,
•
welding or
•
static discharge.
The grounding cable is an electrical shunt for the load cell and mounting unit. High
welding currents can damage load cells, mounting units or the electronics. Voltage spikes
from static discharge can damage the electronics.
Fig. 5-1 Application example grounding cable

5.1.2 Structure

The grounding cable consists of a fine-strand copper wire with a cross-section of 50 mm
and two eyelets, Ø 10mm.
5.2

Mounting

A permanent screw-contact is to be made for fastening the grounding cable, e.g. M10, on
the loading platform and the foundation.
Document No.: A5E00353789B
2
Page 37