Siemens SIWAREX WL230 BB-S SA 사용 설명서 - 페이지 17

{카테고리_이름} Siemens SIWAREX WL230 BB-S SA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAREX WL230 BB-S SA 48 페이지. Base plate and elastomer bearing bb-s sa
Siemens SIWAREX WL230 BB-S SA에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 장비 매뉴얼 (50 페이지), 사용 설명서 (44 페이지)

페이지 인쇄

Application planning

4.1

Load cell dummies

Dummies

Load cells are sensitive sensors. We recommend the following to prevent damage during

installation and transportation of load cells:

● Install the load cells at the latest possible time.

● Use so-called "dummies" or "phantoms" during installation or transportation.

The following can be used as dummies, for example:

● A copy of the installation unit by means of a welded construction for installation work

● A SIWAREX WL230 compact installation unit This option is only useful as an alternative

A copy of the installation unit by means of a welded construction

A piece of pipe or some other steel profile is welded between two plates with the hole pattern

for the fixing screws. Installation work can be carried out with the welded construction.

Use of a SIWAREX WL230 compact installation unit

The compact installation units are delivered pre-assembled. Compact installation units are

set to the installation height of the operational unit. Compact installation units can be used to

perform light assembly work.

4.2

Lifting protection

The following figure shows a proposed solution for lifting protection. The X designates the

possible lifting path of the load bearing implement. The bore ØD must be larger than the

diameter of the bolt Ød. The movement of the load bearing implement must not be hindered.

Figure 4-1

SB-S SA

Operating Instructions, 03/2013, A5E31529044A-01

to elastomeric bearings.

Proposed solution for lifting protection