Siemens SIWAREX WL230 BB-S SA 장비 매뉴얼 - 페이지 37

{카테고리_이름} Siemens SIWAREX WL230 BB-S SA에 대한 장비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAREX WL230 BB-S SA 50 페이지. Base plate and elastomer bearing bb-s sa
Siemens SIWAREX WL230 BB-S SA에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 사용 설명서 (48 페이지), 사용 설명서 (44 페이지)

페이지 인쇄

Service and maintenance

6.1

Servicing and maintenance

Important notes on cleaning

NOTICE

Damage to load cells, measurement errors

Dirt must not be allowed to accumulate in the vicinity of a load cell.

Do not subject cable glands, sealing elements and flat seals directly to the jet from a high-

pressure hose.

Compact installation unit

• Check the compact installation units according to the ambient conditions.

Select the servicing intervals based on the emergence of dust, dirt and moisture.

• Keep the compact installation units free of dirt.

• Check the bearing surfaces of the pendulum supports:

– Clean the bearing surfaces as required.

– Grease the bearing surfaces as needed.

Guide elements

• Check the guide elements according to the ambient conditions.

Select the servicing intervals based on the emergence of dust, dirt and moisture.

• Keep the guide elements free of dirt.

• Clean the pivot heads as required.

• The pivot heads are maintenance-free and need not be lubricated.

Overload protection

Personal injury and damage to property

Dirty, frozen or incorrectly adjusted overload protection elements lead to erroneous

measurements due to blockage or to an overflow of the scale. Personal injury and material

damage may occur.

SB-S SA

Equipment Manual, 12/2020, A5E02390707B-03

DANGER