Siemens SIWAREX WL230 BB-S SA 장비 매뉴얼 - 페이지 9

{카테고리_이름} Siemens SIWAREX WL230 BB-S SA에 대한 장비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAREX WL230 BB-S SA 50 페이지. Base plate and elastomer bearing bb-s sa
Siemens SIWAREX WL230 BB-S SA에 대해서도 마찬가지입니다: 매뉴얼 (36 페이지), 사용 설명서 (48 페이지), 사용 설명서 (44 페이지)

페이지 인쇄

Safety notes

2.1

Prerequisites for safe use

This device left the factory in good working condition. In order to maintain this status and to

ensure safe operation of the device, observe these instructions and all the specifications relevant

to safety.

Observe the information and symbols on the device. Do not remove any information or symbols

from the device. Always keep the information and symbols in a completely legible state.

Symbol

2.1.1

Laws and directives

Observe the safety rules, provisions and laws applicable in your country during connection,

assembly and operation. These include, for example:

• National Electrical Code (NEC - NFPA 70) (USA)

• Canadian Electrical Code (CEC) (Canada)

Further provisions for hazardous area applications are for example:

• IEC 60079-14 (international)

• EN 60079-14 (EU)

2.1.2

Improper device modifications

Risk to personnel, system and environment can result from modifications to the device,

particularly in hazardous areas.

• Only carry out modifications that are described in the instructions for the device. Failure to

SB-S SA

Equipment Manual, 12/2020, A5E02390707B-03

Explanation

Do not turn countersunk screw

WARNING

observe this requirement cancels the manufacturer's warranty and the product approvals.