Siemens SIWAREX WL270 CP-S SA 사용 설명서 - 페이지 26

{카테고리_이름} Siemens SIWAREX WL270 CP-S SA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAREX WL270 CP-S SA 40 페이지. Mounting plates cp-s sa
Siemens SIWAREX WL270 CP-S SA에 대해서도 마찬가지입니다: 사용 설명서 (38 페이지)

페이지 인쇄

Installation

5.2 Mounting the pressure piece set

Compressive strength of the mounting surfaces

The compressive strength of the mounting surfaces has to be appropriate for the surface

pressure of the pressure pieces.

Align the load cell

The lower pressure piece features a pin. This prevents the load cell from twisting. You can

align the lower pressure piece accordingly to determine the orientation of the cable terminal

on the load cell.

Installing the load cell

CAUTION

Personal injuries, damage to the load cells

Insufficiently secured loads can fall and cause injuries or material damage. Therefore,

appropriate lifting tools must be used to lift the load bearing implement. The corresponding

safety regulations must be observed.

CAUTION

Destruction of the load cells and the pressure piece set

Check that the load cells and installation unit are installed correctly, e.g. by checking the

mounting dimensions and oscillation distances. Incorrect assembly can lead to the

destruction of the load cell and the installation unit.

Ensure that the cable does not become damaged or is cut off.

Lay the cables through cable glands in the form of a vertical downwards loop to discourage

the penetration of water.

Adapt the procedure to the installation conditions.

Operating Instructions, 11/2010, A5E03323543B

CP-S SB