Siemens SIWAREX WL270 CP-S SA 사용 설명서 - 페이지 29

{카테고리_이름} Siemens SIWAREX WL270 CP-S SA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAREX WL270 CP-S SA 40 페이지. Mounting plates cp-s sa
Siemens SIWAREX WL270 CP-S SA에 대해서도 마찬가지입니다: 사용 설명서 (38 페이지)

페이지 인쇄

Service and maintenance

6.1

Servicing and maintenance

Important notes on cleaning

CAUTION

Damage to load cells, measurement errors

 Dirt must not be allowed to accumulate in the vicinity of a load cell.

 Do not subject cable glands, sealing elements and flat seals directly to the jet from a

 Do not clean the load cell and installed parts with aggressive cleaning agents. This can

Pressure piece set

● Check the pressure piece set according to the ambient conditions.

● Keep the pressure piece set free of dirt.

● Check the bearing surfaces of the load cells:

Overload protection

Personal injury and damage to property

Dirty, frozen or incorrectly adjusted overload protection elements lead to erroneous

measurements due to blockage or to an overflow of the scale. Personal injury and material

damage may occur.

● Regularly check the existing overload protection elements:

CP-S SB

Operating Instructions, 11/2010, A5E03323543B

high-pressure hose.

even cause corrosion to stainless steel if not used correctly.

Select the servicing intervals based on the emergence of dust, dirt and moisture.

– Clean the bearing surfaces as required.

– Grease the bearing surfaces as needed.

WARNING

– Select the servicing intervals based on the emergence of dust, dirt and moisture.

– Keep the overload protection elements free of dirt and ice.

– Check the settings for the overload protection elements.

– Re-adjust (correct) the overload protection as needed.