Siemens SIWAREX WL290 DB-S CA 사용 설명서 - 페이지 19

{카테고리_이름} Siemens SIWAREX WL290 DB-S CA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SIWAREX WL290 DB-S CA 32 페이지. Silo mounting unit

NOTICE

Improper installation of the load cell in the compact mounting unit

An improper installation of the load cell in the compact mounting unit can destroy the load cell

and the compact mounting unit.

● Check that the load cell and compact mounting unit are installed correctly, for example, by

● To prevent water from penetrating, lay cables through cable glands in the form of a vertical

5.2

Dismantling

For dismantling the load cells, the same safety rules apply as for installation.

1. Disconnect all the supply voltages and auxiliary voltages.

2. Secure the load carrier against falling.

3. Use appropriate hoisting gear and tools.

4. Take the load off the load cell.

5. Carefully remove the load cell without using force. Do not pull on the cable of the load cell.

6. If you intend to reinstall the load cell or send it for repair, do not cut the load cell cable.

7. Do not carry the load cell by the cable.

DB-S CA 2.3 ... 113 t

Operating Instructions, 10/2019, A5E46619167-AA

checking the mounting dimensions and oscillation distances. See the section Technical

data (Page 23).

downwards loop.

Installation

5.2 Dismantling