Siemens ULTRAMAT 6F 추가 장비 매뉴얼 - 페이지 5
{카테고리_이름} Siemens ULTRAMAT 6F에 대한 추가 장비 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens ULTRAMAT 6F 20 페이지. Gas analyzer for the determination of ir-absorbing gases
Siemens ULTRAMAT 6F에 대해서도 마찬가지입니다: 사용 설명서 (49 페이지), 안전 매뉴얼 (24 페이지)
페이지 인쇄
English
Notes
This manual only deals with the components of the CALOMAT 6F (C 6F), OXYMAT 6F (O 6F) and
ULTRAMAT 6F (U 6F) gas analyzers with respect to explosion protection in connection with an EEx p
safety device. In addition to this manual, the manuals of all devices necessary for operating the
system must be observed.
The associated "Special conditions" described in the EC-type examination certificates
PTB 00 ATEX 2022 X and TÜV 01 ATEX 1708 X
enclosed in the Appendix must be observed without fail.
These describe
- the application ranges,
- the minimum requirements for an EEx p monitoring device and
- other precautionary measures which are important for operation.
The technical specifications in this manual may be different to those in the associated manuals for the
analyzers and additional equipment under some circumstances. The technical specifications listed in
this manual are valid in such cases.
To achieve perfect, reliable operation of the analyzers and additional equipment, they may only be
used in the manner described by the manufacturers. In addition, perfect and safe use of these
products is conditional upon proper transport, storage and installation as well as careful operation and
maintenance.
This manual has been written for technically qualified personnel. Familiarity with and technically
correct application of the safety instructions and warnings described in this manual are prerequisites
for safe installation and commissioning. Only qualified personnel have the necessary professional
knowledge to be able to interpret the general safety information and warnings correctly in individual
cases and to put them into practice.
This manual is an essential part of the scope of delivery. For reasons of clarity it does not contain all
details on all versions of the described products and cannot cover every situation which could
conceivably arise during installation, operation, maintenance and use in systems. If you require further
information, or if problems arise which are not dealt with in sufficient detail in this document, please
request the desired information from your local or responsible Siemens branch.
E-2
Additional Equipment Manual EEx p
Order No.:
A5E 000
58873-02