Siemens VersiCharge 8EM1310 Series 연결 매뉴얼 - 페이지 15

{카테고리_이름} Siemens VersiCharge 8EM1310 Series에 대한 연결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens VersiCharge 8EM1310 Series 31 페이지. Ac wallbox iec version

Applications

4.1

The decision to connect the charging station to the internet depends mainly on the local

conditions. The possibilities are illustrated below based on real applications. The decision on

the method of connectivity to the Siemens Device Management should already be made

before the installation, because further adjustments later are very difficult.

The following list of applications is not exhaustive. A combination of these applications may

be possible depending on the situation on location.

Note

• Parent and child devices must have at least firmware V2.111, otherwise call customer

service.

• Switch on the commissioning parent device first and then the child devices, otherwise the

parent hotspot will not be detected.

4.2

4.2.1

As a rule, your own home provides the possibility to ensure connectivity of VersiCharge via

your own home network. This requires the strength of the WiFi signal to be sufficient (see

Connection via WiFi (Page 27)). You can install up to two VersiCharge devices in a single-

family home and connect them to your Wi-Fi.

4.2.2

A smart charging unit for residential use should be connected to the home Wi-Fi network and

the Siemens Device Management website to receive the latest updates for the charging unit.

Siemens also offers a charging unit for residential use without communication.

VersiCharge Connectivity Guide

Getting Started, 12/2021, A5E51237456-AA