Siemens 25 서비스 매뉴얼 - 페이지 5
{카테고리_이름} Siemens 25에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens 25 12 페이지. Combination starters
Siemens 25에 대해서도 마찬가지입니다: 교체 부품 및 사용 설명서 (6 페이지), 문제 해결 매뉴얼 (39 페이지)
페이지 인쇄
CAUTION
To disinfect surfaces, we recommend common liquid solutions of aldehyde-based or
ampholytic surfactant -based disinfectant.
8.4
Product Disposal
Legal regulations may contain special prescriptions concerning the disposal of this
product. In order to avoid environmental damage and/or personal injury, please inform
SIEMENS Customer Service if you want to put the unit out of operation and dispose it.
8.4.1 Radioprotection Material
Lead in X-ray tube assembly and in Collimator 1.65 kg.
8.4.2 Transformer Oil
Oil in X-ray tube assembly, approx. 3.2 kg.
8.4.3 Plastics
Epoxy resin on PC boards, PVC of cables approx. 5 kg.
8.4.4 Electrolytic Capacitors
These capacitors must be emptied. Please inform the Siemens Customer Service.
Capacitors approx. 1.5 kg.
Electrolytic Capcitors approx. 5.5 kg.
8.5
Mechanical Risk
The tension in the spring unit must be relieved. Please inform Siemens Customer
service.
Siemens Ltd. Med India
Do not use scouring powder, organic solvents (may damage
materials) or solvent based cleaning fluids (benzene, alcohol,
spot remove). As is commonly known,the ingredients in
disinfectants are hazardous to your health. Ensure that room is
well ventilated when using any disinfectant. Follow the
instructions for using disinfectants.
Do not spray the unit.The cleaning fluid must not seep into the
generator. Substituted phenol based or chlorine releasing
disinfectant can weaken materials and are not recommended.
The same restrictions apply to undiluted solutions with a high
alcohol content (e.g. for disinfecting hands). Disinfectant
sprays should generally not be used, the spray can seep into
the system,and safety features can no longer be guaranteed
(possible damage to electrical components, formation of
flammable mixtures of air and the solution vapour).
Copyright © SIEMENS LTD. All rights reserved. For internal use only
Maintenance Instructions
Version 6.0
Service Manual
8-4