Epson XP-8600 Small-in-One 여기에서 시작 - 페이지 2
{카테고리_이름} Epson XP-8600 Small-in-One에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson XP-8600 Small-in-One 4 페이지.
![Epson XP-8600 Small-in-One 여기에서 시작](/uploads/products/server2/521617/521617.jpg)
2
Unpack the ink cartridges.
Caution:
• Do not shake the ink cartridges.
• Do not touch the areas shown below. Doing so may prevent
normal operation and printing.
3
Remove the cap from each ink cartridge. Store the caps in
the included plastic bag.
Note:
Save the caps and use them to recap the ink cartridges
after removing them for storage or disposal.
4
Insert the cartridges at an angle in the holder for each
color. Press each cartridge down until it clicks.
5
Lower the scanner unit.
6
Select Installed. Ink charging takes approximately 10
minutes. When you see a completion message on the
printer's LCD screen, charging is complete.
Caution:
Don't turn off the printer or raise the scanner unit while
the printer is charging or you'll waste ink.
Note:
As part of setup, your product's serial number will be sent
to a secure Epson server so that you can be eligible to participate
in programs we may offer from time to time, including the Epson
ink replenishment program. You will have a separate opportunity
to consent to participating in such programs.
7
Follow the on-screen instructions to adjust the print
quality of your product.
Note:
• You need to load paper before you can adjust the print quality.
See the "Load paper" section for details.
• Select Adjust Later if you want to adjust the print quality later.
For more information, see the online User's Guide.
4
Load paper
See the instructions below for loading paper in cassettes
1 and 2.
Note:
See the online User's Guide for a complete list of compatible
paper types, sizes, and capacities, and instructions on loading paper
in the rear paper feed slot and printing on CD/DVD/Blu-ray Discs™.
Cassette 1
Epson paper sizes
×
×
4"
6", 5"
7"
×
8"
10", Letter, A4, Legal
1
Lower the front cover and raise the control panel.
2
Pull out a paper cassette.
Cassette 1
3
Slide the side edge guides outward.
Cassette 1
4
Insert the paper with the glossy or printable side
facedown.
Cassette 1
Note:
Make sure the paper is loaded against the back of the
cassette and not sticking out from the front of the cassette.
Output tray
Cassette 2/
front cover
Cassette 1
Cassette 2
•
•
•
Cassette 2
Cassette 2
Cassette 2