Digital Extender HDC 사용자 설명서 - 페이지 7

{카테고리_이름} Digital Extender HDC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Extender HDC 12 페이지. Hdmi to dvi

4 Video Connection

Step 1: Ensure the digital video source and display is turned off

Step 2: Connect the HDMI, DVI, and Coaxial audio cable

Step 3: Connect power adapter jack

Step 5: Turn on the display

Step 6: Turn on the source test for 720p

EDID data saving

EDID Default is set as 1080P@60Hz. If you want to change the EDID data,

please follow these steps.

Step 1: Connect HDC DVI output port to display or AV Receiver

Step 2: Turn on the display and push EDID S/W for 2~3 seconds

Step 3: EDID LED is illuminated for about 2 second if EDID was saved

correctly

If EDID was not saved correctly, EDID LED blinks 5~6 times. Please try

again after checking the connection of cables and the power of display

and HDC

EDID saving is to display the best resolution between the video source

and the display

If you use digital Audio should EDID save from AV Receiver or HDMI

display

If your AV receiver does not have HDMI port, you should save EDID from

display it supports multi-channel audio