Epson 1710C - PowerLite XGA LCD Projector 설치 매뉴얼 - 페이지 15
{카테고리_이름} Epson 1710C - PowerLite XGA LCD Projector에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 1710C - PowerLite XGA LCD Projector 19 페이지. User replaceable parts list
Epson 1710C - PowerLite XGA LCD Projector에 대해서도 마찬가지입니다: 빠른 설정 (2 페이지), 사용자 설명서 (1 페이지), 부품 목록 (1 페이지), 사양 (2 페이지)
페이지 인쇄
Low-Profile Installation
1.
If your installation requires the overall height of the mount to be less that the approximate 9" shown with
the standard mount assembly, you can convert the height to only 2 ½" by simply removing the adjustment
channel as shown.
2.
Once the extension channel is removed, attach the upper ceiling plate to the ceiling.
3.
Once attached install the bell housing assembly to the upper ceiling plate as shown (Figure 10, Figure 11,
and Figure 12).
Remove the M8 x 16mm
Screws, flat Washers and Star
Washers
Remove the Middle
Extension Completely
Remove the M8 x 16mm
Screws, Flat Washers,
and Star Washers (Both
Sides)
Page - 16 -
Bell Housing
Figure 10
ELPMBUNI
Ceiling Plate
Allen Wrench
Remove the M8 x 16mm
Screws, Flat Washers,
and Star Washers (Both
Sides)
Installation Manual