Samsung 2043SWX - 5ms Widescreen LCD Monitor 빠른 시작 매뉴얼 - 페이지 20

{카테고리_이름} Samsung 2043SWX - 5ms Widescreen LCD Monitor에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 2043SWX - 5ms Widescreen LCD Monitor 26 페이지. Quick guide (korean)
Samsung 2043SWX - 5ms Widescreen LCD Monitor에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (23 페이지), (빠른 시작 가이드 (24 페이지), (한국어) 빠른 시작 매뉴얼 (22 페이지)

페이지 인쇄

Warning Messages

If there is something wrong with the input signal, a message appears on the screen or the

screen goes blank although the power indicator LED is still on. The message may indicate

that the monitor is out of scan range or that you need to check the signal cable.

Environment

The location and the position of the monitor may influence the quality and other features of

the monitor.

If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to

another room.

Remove all electronic devices such as radios, fans, clocks and telephones that are within 3

feet (one meter) of the monitor.

Useful Tips

A monitor recreates visual signals received from the computer. Therefore, if there is a problem

with the computer or the video card, this can cause the monitor to become blank, have poor

coloring, become noisy, and video mode not supported, etc. In this case, first check the source

of the problem, and then contact the Service Center or your dealer.

Judging the monitor's working condition

If there is no image on the screen or a "Not Optimum Mode", "Recommended Mode 1920 x

1080 60 Hz" message comes up, disconnect the cable from the computer while the monitor

is still powered on.

If there is a message coming up on the screen or if the screen goes white, this means the

monitor is in working condition.

In this case, check the computer for trouble.

{2243SW/2243SWX} Check List

Note

Before calling for assistance, check the information in this section to see if you can remedy

any problems yourself. If you do need assistance, please call the phone number on the In-

formation section or contact your dealer.

No images on the screen. I cannot turn on the monitor.

Is the power cord connected properly?

Check the power cord connection and supply.

Can you see "Check Signal Cable" on the screen?

(Connected using the D-sub cable)

Check the signal cable connection.

Troubleshooting