Samsung 2233RZ - Syncmaster 22" 3D Gaming LCD Monito 사용자 설명서 - 페이지 11
{카테고리_이름} Samsung 2233RZ - Syncmaster 22" 3D Gaming LCD Monito에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 2233RZ - Syncmaster 22" 3D Gaming LCD Monito 16 페이지. Quick guide (korean)
Samsung 2233RZ - Syncmaster 22" 3D Gaming LCD Monito에 대해서도 마찬가지입니다: 사양 (2 페이지), (스페인어) 매뉴얼 델 유저리오 (16 페이지), (한국어) 빠른 시작 매뉴얼 (22 페이지), (한국어) 퀵 매뉴얼 (13 페이지)
페이지 인쇄
Useful Tips
A monitor recreates visual signals received from the computer. Therefore, if there is a problem
with the computer or the video card, this can cause the monitor to become blank, have poor
coloring, become noisy, and video mode not supported, etc. In this case, first check the source
of the problem, and then contact the Service Center or your dealer.
Judging the monitor's working condition
If there is no image on the screen or a "Not Optimum Mode", "Recommended Mode 1680 x
1050 120 Hz" message comes up, disconnect the cable from the computer while the monitor
is still powered on.
If there is a message coming up on the screen or if the screen goes white, this means the
monitor is in working condition.
In this case, check the computer for trouble.
Check List
Note
Before calling for assistance, check the information in this section to see if you can remedy
any problems yourself. If you do need assistance, please call the phone number on the In-
formation section or contact your dealer.
No images on the screen. I cannot turn on the monitor.
Q:
Is the power cord connected properly?
A:
Check the power cord connection and supply.
Q:
Can you see "Check Signal Cable" on the screen?
A:
Check the signal cable connection.
(Connected using the DVI cable)
Press '
Q:
If the power is on, reboot the computer to see the initial screen (the login screen), which
can be seen.
A:
If the initial screen (the login screen) appears, boot the computer in the applicable mode
(the safe mode for Windows ME/XP/2000) and then change the frequency of the video
card.
(Refer to the Preset Timing Modes)
If the initial screen (the login screen) does not appear, contact the Service Center or
your dealer.
Q:
Can you see "Not Optimum Mode", "Recommended Mode 1680 x 1050 120 Hz" on the
screen?
A:
You can see this message when the signal from the video card exceeds the maximum
resolution and frequency that the monitor can handle properly.
A:
Adjust the maximum resolution and frequency that the monitor can handle properly.
A:
If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode", "Recommended
Mode 1680 x 1050 120 Hz" message is displayed. If the display exceeds 85 Hz, the
Troubleshooting
' button to have the monitor double-check the input signal source.