Samsung 320MP-2 - SyncMaster - 32" LCD Flat Panel Display 빠른 시작 매뉴얼 - 페이지 18
{카테고리_이름} Samsung 320MP-2 - SyncMaster - 32" LCD Flat Panel Display에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 320MP-2 - SyncMaster - 32" LCD Flat Panel Display 28 페이지. Quick guide (korean)
Samsung 320MP-2 - SyncMaster - 32" LCD Flat Panel Display에 대해서도 마찬가지입니다: 사양 (2 페이지), (빠른 시작 가이드 (29 페이지)
페이지 인쇄
1.
Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the
LCD Display.
2.
Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
3.
Select AV using the SOURCE .
Note
The LCD Display has AV connection terminals to connect AV input devices like DVDs, VCRs or
Camcorders. You may enjoy AV signals as long as the LCD Display is turned on.
Connecting to a Camcorder
1.
Locate the AV output jacks on the camcorder. They are usually found on the side or back of the
camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder
and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .
2.
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN
[VIDEO] on the LCD Display .
3.
Select AV for the Camcorder connection using the SOURCE button on the front of the LCD
Display or on the remote control.
4.
Then, start the Camcorders with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder. (If not, check your local
electronics store.) If your camcorder is stereo, you need to connect a set of two cables.
Connecting a DVD Player
Connections