Samsung 320MXn-2 - SyncMaster - 32" LCD Flat Panel Display 빠른 시작 매뉴얼 - 페이지 15
{카테고리_이름} Samsung 320MXn-2 - SyncMaster - 32" LCD Flat Panel Display에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 320MXn-2 - SyncMaster - 32" LCD Flat Panel Display 26 페이지. Quick guide (korean)
Samsung 320MXn-2 - SyncMaster - 32" LCD Flat Panel Display에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (29 페이지), 사양 (2 페이지), (빠른 시작 가이드 (29 페이지), (한국어) 빠른 시작 매뉴얼 (28 페이지)
페이지 인쇄
1.
Connect an audio cable to [AV/COMPONENT AUDIO IN (R-AUDIO-L)] on
the product and the audio port on an external device such as a VCR or
DVD player.
2.
Connect a video cable to [AV IN] on the product and the video output port
on the external device.
3.
Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
4.
Press SOURCE on the product or remote control and select "AV".
Connecting to a Camcorder
1.
Locate the AV output jacks on the camcorder. They are usually found on
the side or back of the camcorder. Connect a video cable between the
VIDEO OUTPUT jack on the camcorder and the [AV IN] on the LCD Dis-
play .
2.
Connect a set of audio cables between the AUDIO OUTPUT jacks on the
camcorder and the [AV /COMPONENT AUDIO IN (R-AUDIO-L)] on the
LCD Display .
3.
Press SOURCE on the product or remote control and select "AV".
4.
Then, start the Camcorders with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder.
(If not, check your local electronics store.)
If your camcorder is stereo, you need to connect a set of two cables.
Connections