Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display 빠른 시작 매뉴얼 - 페이지 16
{카테고리_이름} Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display 22 페이지. Quick guide (korean)
Samsung 400MX - SyncMaster - 40" LCD Flat Panel Display에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (28 페이지), 사양 (2 페이지), (프랑스어) 빠른 시작 가이드 (22 페이지), (한국어) 빠른 시작 매뉴얼 (21 페이지)
페이지 인쇄
Troubleshooting
Self-Test Feature Check
Note
Check the following items yourself before calling for assistance. Contact a Service Center for problems
that you cannot solve by yourself.
Self-Test Feature Check
1.
Turn off both your computer and the LCD Display.
2.
Unplug the video cable from the back of the computer.
3.
Turn on the LCD Display.
The figure shown below ("Check Signal Cable") appears on a black background when the LCD
Display is working normally even though no video signal is detected: While in the Self-Test mode,
the LED power indicator remains green and the figure moves around on the screen.
4.
Turn off your LCD Display and reconnect the video cable; then turn on both your computer and
the LCD Display
If your LCD Display screen remains blank after using the previous procedure, check your video con-
troller and computer system; your LCD Display is functioning properly.
Warning Messages
You can even view the screen at a resolution of 1360(1920) x 768(1080). However, you will receive
the following message for a minute; You can choose to change the screen resolution or stay in the
current mode during that time. And if the resolution is more than 85Hz, you will see the black screen
because the LCD Display does not support over 85Hz.
Note
Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported by the
LCD Display.
Maintenance and Cleaning
1) Maintaining the LCD Display Case.
Clean with a soft cloth after disconnecting the power cord.
86