Samsung 460TSN-2 - 46" - Touch Screen LCD 빠른 시작 매뉴얼 - 페이지 16

{카테고리_이름} Samsung 460TSN-2 - 46" - Touch Screen LCD에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 460TSN-2 - 46" - Touch Screen LCD 22 페이지. Quick guide (korean)
Samsung 460TSN-2 - 46" - Touch Screen LCD에 대해서도 마찬가지입니다: (빠른 시작 가이드 (22 페이지), (프랑스어) 빠른 시작 가이드 (21 페이지), (한국어) 빠른 시작 매뉴얼 (21 페이지)

페이지 인쇄

Troubleshooting

Self-Test Feature Check

Note

Check the following items yourself before calling for assistance. Contact a Service Center for

problems that you cannot solve by yourself.

Self-Test Feature Check

Turn off both your computer and the LCD Display.

Unplug the video cable from the back of the computer.

Turn on the LCD Display.

The figure shown below ("Check Signal Cable") appears on a black background when

the LCD Display is working normally even though no video signal is detected: While in

the Self-Test mode, the LED power indicator remains green and the figure moves around

on the screen.

Turn off your LCD Display and reconnect the video cable; then turn on both your com-

puter and the LCD Display

If your LCD Display screen remains blank after using the previous procedure, check your

video controller and computer system; your LCD Display is functioning properly.

Warning Messages

You can even view the screen at a resolution of 1920 x 1080. However, you will receive the

following message for a minute; You can choose to change the screen resolution or stay in

the current mode during that time. And if the resolution is more than 85Hz, you will see the

black screen because the LCD Display does not support over 85Hz.

Note

Refer to Specifications > Preset Timing Modes for the resolutions or frequencies supported

by the LCD Display.

Maintenance and Cleaning

1) Maintaining the LCD Display Case.

Clean with a soft cloth after disconnecting the power cord.