Samsung 520DXN - SyncMaster - 52" LCD Flat Panel Display 빠른 시작 매뉴얼 - 페이지 14
{카테고리_이름} Samsung 520DXN - SyncMaster - 52" LCD Flat Panel Display에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 520DXN - SyncMaster - 52" LCD Flat Panel Display 26 페이지. Samsung lcd monitor quick start guide
Samsung 520DXN - SyncMaster - 52" LCD Flat Panel Display에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (25 페이지), 사양 (2 페이지), (스페인어) 빠른 시작 가이드 (26 페이지), (한국어) 빠른 시작 매뉴얼 (23 페이지)
페이지 인쇄
•
Connect the BNC Cable to the BNC/COMPONENT IN - R, G, B, H, V ports
on the back of your LCD Display and the 15 pin D-sub Port on the computer.
Connect the audio cable for your LCD Display to the audio port on the back of
your computer.
Note
•
Turn on both your computer and the LCD Display.
•
The DVI cable is optional.
•
Contact a local SAMSUNG Electronics Service Center to buy optional items.
Connecting to Other devices
Using a Power cord with Earth
•
In the event of failure, the earth lead may cause electric shock. Make sure to
wire the earth lead in correctly, before connecting the AC power. When un-
wiring the earth lead, make sure to disconnect the AC power in advance.
Note
AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected
to the LCD Display. For detailed information on connecting AV input devices, refer to the contents
under Adjusting Your LCD Display.
Connecting AV Devices
1.
Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [R-AUDIO-L] port of the
LCD Display.
2.
Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.
Using the BNC (Analog) connector on the video card.
Connections