Samsung 690 Series 사용자 설명서 - 페이지 23
{카테고리_이름} Samsung 690 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 690 Series 40 페이지. Series 6
Samsung 690 Series에 대해서도 마찬가지입니다: 사양 (36 페이지), 설치 매뉴얼 (50 페이지), 설치 매뉴얼 (48 페이지)
페이지 인쇄
06. Troubleshooting and
Maintenance
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solutions. Also, review the
Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.com/
support or call Samsung Customer Service at 1-800-SAMSUNG (1-800-726-7864).
Issues
Flickering and Dimming
Screen Color is Not Correct
Screen Brightness
Blurred Images
Unwanted Powering Off
Trouble Powering On
Stand Assembly
Cannot Find a Channel
‐ For detailed troubleshooting information, watch the troubleshooting videos at www.samsung.com/spsn.
[UH8000-ZA]BN68-05868A-03ENG.indb 23
Solutions and Explanations
Try disabling some of the TV's energy efficiency features.
Disable Energy Saving (System > Eco Solution > Eco Sensor) and/or Energy
Saving (System > Eco Solution > Energy Saving) and check again.
Run a Self Diagnosis Picture Test (Support > Self Diagnosis > Picture Test).
If the picture problem is caused by the TV, the problem should be visible
in the Picture Test. If the problem is not visible, next confirm that the TV's
video input ports are connected to the correct external video device output
ports and that none of the connections are loose. Finally, if possible, test
your external video devices by connecting them to another TV.
Adjust the following settings:
Navigate to Picture and adjust Backlight, Contrast, Brightness, Sharpness,
Color, Tint (G/R) and other picture quality adjustment settings.
Turn on Auto Motion Plus (Picture > Picture Options > Auto Motion Plus).
Check if Sleep Timer (System > Time > Sleep Timer) has been enabled.
Sleep Timer automatically turns off the TV after an amount of time that
you select. If the Sleep Timer has not been enabled, see if No Signal Power
Off (System > Eco Solution > No Signal Power Off) or Auto Power Off
(System > Eco Solution > Auto Power Off) has been enabled. No Signal
Power Off turns off the TV if no signal has been received by the TV for a
specified period time. Auto Power Off turns off the TV if there has been no
user input in four hours.
Confirm that the power cord is connected and that the remote has live
batteries and is functioning correctly. If the power cord is connected
properly and the remote control is operating normally, there might be
a problem with the antenna cable connection or the cable/satellite box
might not be turned on. Check the antenna connection or turn on the
cable/satellite box.
If you have any trouble assembling the stand, review the stand assembly
instruction in the Quick Start Guide.
Re-run Setup (Go to MENU > System > Setup) or run Auto Program. (Go to
MENU > Broadcasting > Auto Program).
English - 23
2014-03-13
6:06:04