Samsung 690 Series 설치 매뉴얼 - 페이지 36
{카테고리_이름} Samsung 690 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 690 Series 50 페이지. Series 6
Samsung 690 Series에 대해서도 마찬가지입니다: 사양 (36 페이지), 사용자 설명서 (40 페이지), 설치 매뉴얼 (48 페이지)
페이지 인쇄
USB Cloning
USB Cloning is used to download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one
TV set and upload them to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
• Cloning from TV to USB: This copy the stored data from the TV set to the USB device.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter Hotel Option by pressing buttons in order.
‐
MUTE
→ 1 → 1 → 9 →
3. Press the ▲ or ▼ button to select "Clone TV to USB", then press the
4. When the message "Clone TV to USB" is displayed, press the
5. You can Make sure USB cloning behaviour.
‐ In Progress: during copying data to USB.
‐ Completed: copy operation was finished successfully.
‐ Failed: copy operation was not finished successfully.
‐ No USB: any USB is not connected.
• Cloning from USB to TV: This downloads the stored data in the USB device to TV set.
1. Insert a USB drive into the USB port on the rear of the TV.
2. Enter Hotel Option by pressing buttons in order:
3. Press the ▲ or ▼ button to select "Clone USB to TV", and then press the
4. When the message "Clone USB to TV" is displayed, then press the
5. You can Make sure USB cloning behaviour.
‐ In Progress: during copying data to TV.
‐ Completed: copy operation was finished successfully.
‐ Failed: copy operation was not finished successfully.
‐ No USB: any USB is not connected.
‐ No File: there is no file to copy on the USB.
✎ If you insert the USB device when the TV is on, a pop-up window may appear. If this occurs, press Exit, and then
continue.
For fast, instant cloning during installation,
insert a USB driver with master settings from the first TV and press the Enter key for 5 seconds.
36
English
ENTER
MUTE
ENTER
button.
ENTER
button.
→ 1 → 1 → 9 →
ENTER
ENTER
ENTER
button.
Logo/Message
Cloning
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialise
Logo/Message
Cloning
d
button.
Clone TV to USB
Clone USB to TV
Setting Auto Initialise
USB
(5V 0.5A)
(HDD1.0A)
/ CLONING
OFF
OFF