Samsung 920N - SyncMaster - 19" LCD Monitor 서비스 매뉴얼 - 페이지 15

{카테고리_이름} Samsung 920N - SyncMaster - 19" LCD Monitor에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Samsung 920N - SyncMaster - 19" LCD Monitor 43 페이지. Tft-lcd monitor
Samsung 920N - SyncMaster - 19" LCD Monitor에 대해서도 마찬가지입니다: 사양 (2 페이지)

페이지 인쇄

5 Troubleshooting

Notes: 1. Before troubleshooting, setup the PC's display as below.

• Resolution: 1280 x 1024

• H-frequency: 64 kHz

• V-frequency: 60 Hz

2. If no picture appears, make sure the power cord is correctly connected.

3. Check the following circuits.

• No raster appears: Function PBA, Main PBA, I/P PBA

• 5V develop but no screen: Main PBA

• 5V does not develop: I/P PBA

4. If you push and hold the "

automatically returns to the factory preset.

5-1-2 No Power (MJ17A*/MJ19A*/MJ17B*/MJ19B*/MJ19E*/MJ19US*/MJ19QS*)

When Pin 4 of CN600 is 0V

does proper DC 13V, 5V

appear at Pin 1, 2 and 6, 7 of

CN600 separately?

Yes

When Pin 4 of IC600 is DC 0.5V

does proper DC 0.5V appear at

Pin 5 and 6 of IC600?

Yes

When Pin 2, 3 of IC601 is

DC 3.3V does proper DC 4.3V

appear at Pin 1 of IC601?

Yes

When Pin 2, 3 of IC601 is

DC 4.3V does proper DC 2.5V

appear at Pin 4 of IC601?

* 0V means power on state.

When the monitor work well except DPMS and power

switch off,

0V should be applied to number 4 of CN600.

5-2

(Enter/Source)" button for more than 5 seconds, the monitor

Check Function Ass'y.

Yes

Change IP Board.

Check IC600 and related circuit.

Check IC601 and related circuit.