Siemens SSC131.39U 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} Siemens SSC131.39U에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens SSC131.39U 17 페이지. Electromotoric actuator
![Siemens SSC131.39U 빠른 시작 매뉴얼](/uploads/products/server2/5231743/5231743.jpg)
Operating voltage must be switched off during any maintenance!
When carrying out service work on the plant, note the following:
●
Switch off operating voltage.
●
If necessary, disconnect electrical connections from the terminals.
●
The actuator must be commissioned only with a correctly mounted valve in place!
Repair
The actuators cannot be repaired; the complete unit must be replaced.
Disposal
Warranty
Technical data on specific applications are valid only together with Siemens products listed
under "Equipment combinations". Siemens rejects any and all warranties in the event that
third-party products are used.
Open Source Software (OSS)
Software license overview
These devices use Open Source Software (OSS). All Open Source Software components
used in the product (to include copyrights and licensing agreement) are available at
http://siemens.com/bt/download.
Firmware version
2.10.0 or above
Siemens
Smart Infrastructure
WARNING
NOTICE
The device is considered an electronic device for disposal and may not
be disposed of as domestic waste.
●
Dispose of the device through channels provided for this purpose.
●
Comply with all local and currently applicable laws and regulations.
OSS document
Document ID
Title
A6V13503690
Readme OSS for Modulating Room Actuator 200N, 300N
Device
All
9
A6V12681517_enUS_a
02/09/2023