Cisco Unified Communications Manager Accessibility Features
Accessibility Feature
Programmable Line
Key (PLK)
Audible Message
Waiting Indicator
(AMWI)
Do Not Disturb (Alert
and Reject)
Busy Lamp Field
Accessibility Features for the Cisco Unified SIP Phone 3905
8
Description
You can use the line buttons to initiate, answer,
or switch to a call on a particular line. A
limited number of features, such as speed dial,
extension mobility, privacy, Busy Lamp Field
(BLF) speed dial, Do Not Disturb (DND), and
Service URLs, get assigned to these buttons.
The PLK feature expands the features that can
be assigned to the line buttons to include those
that softkeys normally control; for example
New Call, Call Back, End Call, and Forward
All. When these features are configured on the
line buttons, they are always visible, so you
can have a "hard" New Call key.
You can access features easily that may be
assigned to softkeys normally, which can be
too small and difficult to use.
Cisco Unified IP Phones can send a
line-specific stutter dial tone when a voice
message is waiting on the phone. You hear it
only when using the line with the waiting
messages. When you go off hook (on the line
for which a voice message has been left), the
stutter dial tone is heard.
You can change the audible voice-message
indicator setting by logging in to your phone
support pages, and changing the audible
message-indicator setting to On or Off.
Your administrator configures the phone to
turn on all audible and visual notifications, turn
on ringer only, or to choose the type of alert a
phone should play for incoming calls.
You can use the Busy Lamp Field (BLF)
feature to monitor the call state of a directory
number (DN) associated with a speed-dial
button, call log, or directory listing on the
phone.
In addition, you can use BLF pickup to monitor
incoming calls on a directory number.
When the DN receives an incoming call, the
system alerts the you so that you can then pick
up the call.
Accessibility Features for the Cisco Unified SIP Phone 3905
Configuration Requirements
Standard on all Cisco IP Phones;
configuration is required.
Your administrator assigns PLKs
to your phone.
Standard on all Cisco IP Phones.
Configuration is required:
• administrator
• phone support pages
Standard on all Cisco IP Phones;
configuration is required.
Standard on all Cisco IP Phones;
configuration is required.
페이지 인쇄