Epson 3LCD - PowerLite S4 Projector 빠른 설정 매뉴얼 - 페이지 2
{카테고리_이름} Epson 3LCD - PowerLite S4 Projector에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 3LCD - PowerLite S4 Projector 6 페이지. User replaceable parts list
Epson 3LCD - PowerLite S4 Projector에 대해서도 마찬가지입니다: 사양 (2 페이지), 제품 정보 (9 페이지), 설치 매뉴얼 (19 페이지), 부품 목록 (1 페이지)
페이지 인쇄
2
Connect your video source
Connect the projector to a computer or video source using any of the available
connections shown below.
•
Check the connectors on your video equipment. If more than one
connection is available, choose the one that provides the best quality.
(The projector connectors from highest to lowest quality are
Computer/Component Video, S-Video, and Video.)
•
A computer cable is included. You can purchase optional video cables
through Epson or at local electronics stores. See the next page for
accessory information.
•
You can connect up to 3 video devices and use the remote control to
switch between them.
Computer
cable
(included)
NOTE
To play back audio through the projector, you can connect an audio
cable from your video device to the audio ports on the projector.
See the User's Guide on your CD-ROM for instructions.
3
Set up the remote control
1
Remove the battery cover.
2
Insert the batteries.
3
Replace the battery cover.
The remote control is ready for use.
Component
video to
S-Video
VGA cable
cable
RCA video cable
(composite
video)
Audio ports