Epson 3LCD - PowerLite S4 Projector 설치 매뉴얼 - 페이지 18
{카테고리_이름} Epson 3LCD - PowerLite S4 Projector에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 3LCD - PowerLite S4 Projector 19 페이지. User replaceable parts list
Epson 3LCD - PowerLite S4 Projector에 대해서도 마찬가지입니다: 사양 (2 페이지), 제품 정보 (9 페이지), 빠른 설정 매뉴얼 (6 페이지), 부품 목록 (1 페이지)
페이지 인쇄
ELPMBUNI
Final Adjustments
1.
With the projector secured in the mount and power on and signal supplied to the projector you can now
proceed with the final height, tilt, and roll and yaw to optimize the projected image.
2.
The height can be adjusted by slightly loosening the two 8mm height adjustment screws and raising or
lowering the projector (Figure 14).
3.
Once the height is achieved tighten the two screws.
4.
To adjust the tilt angle of the projector, slightly loosen the side M8 screws and tilt to the desired angle to
the screen and firmly tighten the two M8 tilt adjustment screws (Figure 15).
5.
If roll adjustment is needed to square the images on the screen, slightly loosen the front and rear M8
screws and adjust to the desired angle then firmly tighten the two M8 roll adjustment screws (Figure 16).
(Roll) Adjusting
Screws
Allen Wrench
Installation Manual
Wood Stud
Allen Wrench
Figure 14
Figure 15
Figure 16
Ceiling
Height Adjustable
Screws
Wood Stud
Ceiling
Tilt Adjusting Screws
Allen Wrench
Wood Stud
Ceiling
Page - 19 -