Cisco 3911 사용자 설명서 - 페이지 11
{카테고리_이름} Cisco 3911에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 3911 42 페이지. Unified sip ip phone
Cisco 3911에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 사용자 설명서 (14 페이지)
페이지 인쇄
Adjusting the Handset Rest
When you connect your phone, you might want to adjust the handset rest to ensure that the receiver
will not slip out of the cradle. See the table below for instructions.
1
1
Set the handset aside and pull the square plastic tab from the handset rest.
Rotate the tab 180 degrees.
2
Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab.
3
Return the handset to the handset rest.
Registering with TAPS
After your phone is connected to the network, your system administrator might ask you to
auto-register your phone using the Tool for Auto-Registered Phones Support (TAPS). TAPS might be
used either for a new phone or to replace an existing phone.
To register with TAPS, pick up the handset, enter the TAPS extension provided by your system
administrator, and follow the voice prompts. You might need to enter your entire extension, including
the area code. After your phone displays a confirmation message, hang up. The phone will restart.
Headset Information
To use a headset, make sure the handset is disconnected, then connect the headset to the Handset port
on the back of your phone.
Depending on headset manufacturer's recommendations, an external amplifier may be required. Refer
to headset manufacturer's product documentation for more information.
Cisco Unified SIP Phone 3911 Phone Guide for Cisco Unified Communications Manager
2
3
Connecting Your Phone
5