Cisco 504 빠른 사용 설명서 - 페이지 4
{카테고리_이름} Cisco 504에 대한 빠른 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 504 7 페이지. 5xx series
Cisco 504에 대해서도 마찬가지입니다: 빠른 사용 설명서 (7 페이지), 관리자 매뉴얼 (23 페이지), 관리자 매뉴얼 (6 페이지), 관리자 매뉴얼 (22 페이지)
페이지 인쇄
5) Softkey buttons. Press to perform the action shown directly above it on the screen e.g.
Redial.
6) Navigation button. Press up or down to scroll through menu items on the screen.
7) Messages button. Press to access voicemail (once set up by the system administrator).
8) Hold button. Press to put a call on hold.
9) Set-up button. Reveals a menu from where you can configure features and preferences –
e.g directories, call history, set up functions such as call forwarding and phone status
information.
10) Mute button. Press to turn on or off. When the phone is on Mute, the button glows red. A
flashing red mute button indicates the phone has no network connection.
11) Volume button. Press + to increase or – to lower the volume level of the handset, headset
or speaker (when the phone is off-hook) or ringer (when the phone is on-hook).
12) Headset button. Press to turn on or off. When the headset is on, the button glows green.
13) Speaker button. Press to turn on or off. When the speaker is on, the button glows green.
14) Keypad. Press keys to dial phone numbers, enter letters, and choose menu items.
Making calls
There are three ways to make calls on the Cisco 504. You can:
lift the handset or
push the headset button or
push the speaker button.
When you hear the dial tone, enter your number and push Dial to call.
Note: You don't need to dial 9 first to get an outside line.
Redial
To call a number you've called before, press the Redial soft key. Use your navigation button
to scroll to the number you want to dial.