Cisco 524G - Unified IP Phone VoIP 사용자 설명서 - 페이지 10
{카테고리_이름} Cisco 524G - Unified IP Phone VoIP에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 524G - Unified IP Phone VoIP 18 페이지. Unified communications manager express
페이지 인쇄
Transfer a Call
To transfer a selected call to another number, use the following method:
1. During a call, press Trnsfr. The call is placed on hold.
2. Dial the number to which you want to transfer the call.
3. Press Trnsfr to complete the transfer or wait for the call to be answered. Speak to the transfer recipient. Then press the
Trnsfr button or hang up the handset.
4. If the transfer fails, press EndCall then press Resume to return to the original call.
Cancel Transfer
1. To cancel your consult call-transfer attempt:
Press EndCall.
–
2. To reconnect to the original caller:
Press Resume.
–
Transfer to Voice Mail
To transfer a call to the recipient's voice mail, use the following method:
1. Press TrnsfVM to place the call on hold.
2. Enter the recipient's extension number and press TrnsfVM again.
Forward All Calls
To forward all incoming calls to another number, use the following method:
1. Press CFwdALL. You hear a confirmation beep.
2. Dial the number to which you want to forward all your calls. Dial the number exactly as you would if you were placing a
call to that number. Remember to include locally required prefix numbers.
3. Press the pound key (#) or EndCall. The phone display is updated to show that calls are to be forwarded.
To forward calls to voice mail, manually enter the voice-mail number, or use the soft key and button sequence of
Note
CFwdALL plus the Messages button, followed by the EndCall.
To forward calls to a speed-dial number, use the soft key and button sequence of the CFwdALL plus a speed-dial button,
followed by EndCall
To cancel call forwarding:
• Press CFwdALL.
Pick Up Calls
To pick up a call that is on hold or a call that is ringing at another extension, use the following method:
1. Press PickUp.
2. Dial the extension number of the Cisco Unified IP phone that you want to pick up. Call control is transferred to your phone.
To selectively pick up a call ringing at a number that belongs to a pickup group:
• Press GPickUp. If only one pickup group is defined in the entire Cisco Unified Communications Manager Express system,
call control is transferred to your phone.
• If the ringing telephone and your phone are in the same pickup group, press the asterisk (*) to transfer call control to your
phone.
10