Cisco 6861 배포 매뉴얼 - 페이지 21

{카테고리_이름} Cisco 6861에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6861 33 페이지. Multiplatform phones wireless lan
Cisco 6861에 대해서도 마찬가지입니다: 설치 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Cisco 6861 배포 매뉴얼

Configure Wireless Connection on Your Phone

You can connect your phone to a wireless network through WLAN profiles or WPS. WLAN profiles can be configured on
the phone web page, on the phone screen, or in the configuration file by remote provisioning.

Wireless LAN Profiles (Web Page)

Be sure that your phone has got a valid IP address either by wired or wireless connection, and you have the administrator
access to your phone.
2.
Access the phone administrator web page by visiting one of the following URL and enter the administrator password
when prompted.
http://<phone_IP>/admin/advanced, or
3.
Go to the Wi-Fi Settings section on the Voice > System tab.
The Cisco IP Phone 6861 Multiplatform Phone supports 4 Wi-Fi profiles. When you set Phone-wifi-on to Yes and
Phone-wifi-type to WLAN, the phone tries the 4 profiles in the sequence defined in Wi-Fi Profile Order field. For each
Wi-Fi profile, Network Name refers to the SSID of the AP you want to connect to.
Security Mode provides 7 options: Auto, EAP-Fast, PEAP-GTC, PEAP-MSCHAPV2, PSK, WEP and NONE.
Security Mode selection is determined by the authentication method your target AP uses.
•
If EAP-FAST, PEAP-MSCHAPv2, or PEAP-GTC is selected then Wi-Fi User ID and Wi-Fi Password are
required.
21
https://<phone_IP>/admin/advanced
Cisco IP Phone 6861 Multiplatform Phones Wireless LAN Deployment Guide