Cisco 6901 Standard 관리 매뉴얼 - 페이지 4
{카테고리_이름} Cisco 6901 Standard에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6901 Standard 12 페이지. Unified ip phone
Cisco 6901 Standard에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 관리 매뉴얼 (10 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (50 페이지), 매뉴얼 (10 페이지), 매뉴얼 (28 페이지)
페이지 인쇄
Cisco Unified IP Phone Power
Barge
Direct Transfer
Select
The users cannot create conference and transfer calls across different lines.
Cisco Unified IP Phone Power
The Cisco Unified IP Phone 6901 and 6911 can be powered with external power or with Power over Ethernet
(PoE). A separate power supply provides external power. A switch provides PoE through the Ethernet cable
attached to a phone.
When you install an externally powered phone, connect the power supply to the phone and to a power
Caution
outlet before you connect the Ethernet cable to the phone. When you remove an externally powered phone,
disconnect the Ethernet cable from the phone before you disconnect the power supply.
Power Guidelines
The following table provides guidelines for powering the Cisco Unified IP Phone 6901 and 6911.
Table 1: Guidelines for Powering the Cisco Unified IP Phone 6901 and 6911
Type
External power, provided
through the
CP-PWR-CUBE-3 external
power supply.
External power, provided
through the Cisco Unified
IP Phone Power Injector.
Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
4
Not supported.
Not supported.
Not supported.
Guidelines
The Cisco Unified IP Phone 6901 and 6911 use the CP-PWR-CUBE-3 power
supply.
The Cisco Unified IP Phone Power Injector may be used with any Cisco Unified
IP Phone. Functioning as a midspan device, the injector delivers inline power
to the attached phone. The Cisco Unified IP Phone Power Injector connects
between a switch port and the IP Phone, and supports a maximum cable length
of 100 meter (m) between the unpowered switch and the IP Phone.
Cisco Unified IP Phone and Telephony Networks