Cisco 6941 - Unified IP Phone Slimline VoIP 설정 매뉴얼 - 페이지 5

{카테고리_이름} Cisco 6941 - Unified IP Phone Slimline VoIP에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6941 - Unified IP Phone Slimline VoIP 16 페이지. Two-line ip endpoint supporting both video and light-to-moderate voice communications
Cisco 6941 - Unified IP Phone Slimline VoIP에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 릴리스 정보 (18 페이지), 데이터시트 (5 페이지), 사용자 설명서 (38 페이지), 관리 매뉴얼 (14 페이지), 특징 (29 페이지), 사용자 설명서 (24 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 참조 매뉴얼 (4 페이지), 빠른 참조 카드 (2 페이지), 관리 매뉴얼 (19 페이지), 사용 설명서 (7 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (4 페이지)

Chapter

Installing the Cisco Unified IP Phone

You must connect the Cisco Unified IP Phone to the network and to a power source before using it. See

Figure 3-1

connections for a Cisco Unified IP Phone 6945, and

Unified IP Phone 6961.

Before you install a phone, even if it is new, upgrade the phone to the current firmware image. Before

Note

using external devices, read the

performance information.

To install a Cisco Unified IP Phone, perform the tasks described in

Table 3-1

Installing the Cisco Unified IP Phone 6921, 6941, 6945, and 6961

Task

Purpose

Connect the handset to the Handset port.

Connect a headset to the Headset port.

Optional. You can add a headset later if you do not

connect one now.

Optional. Connect the power supply to the Cisco DC

Adapter port.

Connect a straight-through Ethernet cable from the

switch to the network port labeled Network on the

Cisco Unified IP Phone 6921, 6941, 6945, and 6961.

Each Cisco Unified IP Phone ships with one Ethernet

cable in the box.

You can use either Category 3/5/5e cabling for

10-Mbps connections, but you must use Category 5/5e

for 100 Mbps connections.

Connect a straight-through Ethernet cable from

another network device, such as a desktop computer,

to the access port labeled Computer on the

Cisco Unified IP Phone 6921, 6941, 6945, and 6961.

Optional. You can connect another network device

later if you do not connect one now.

You can use either Category 3/5/5e cabling for

10-Mbps connections, but you must use Category 5/5e

for 100 Mbps connections.

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24567-01

shows the connections for Cisco Unified IP Phones 6921 and 6941,

"Using External Devices" section on page 3-4

Installing the Cisco Unified IP Phone

Figure 3-2

shows the connections for a Cisco

Table