Cisco 6945 Series 설정 매뉴얼

{카테고리_이름} Cisco 6945 Series에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 6945 Series 16 페이지. 6900 series
Cisco 6945 Series에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 빠른 참조 (2 페이지), 릴리스 정보 (18 페이지), 사용자 설명서 (10 페이지), 사용자 설명서 (38 페이지), 사용자 설명서 (8 페이지), 관리 매뉴얼 (14 페이지), 특징 (29 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 설치 및 사용자 설명서 (12 페이지), 빠른 참조 사용 설명서 (2 페이지), 매뉴얼 (2 페이지), 지침 (3 페이지), 빠른 시작 매뉴얼 (2 페이지), 기능 설명서 (4 페이지), 사용자 설명서 (34 페이지), 빠른 설치 매뉴얼 (12 페이지), 빠른 참조 매뉴얼 (2 페이지)

Cisco 6945 Series 설정 매뉴얼
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the Cisco Unified IP Phone on an IP
telephony network:
Before you install a Cisco Unified IP phone, you must decide how to configure the phone in your
Note
network. Then you can install the phone and verify its functionality. For more information, see
Chapter 2, "Preparing to Install the Cisco Unified IP Phone on Your Network."

Before You Begin

Before installing the Cisco Unified IP Phone, review the requirements in these sections:

Network Requirements

For the Cisco Unified IP Phone to successfully operate as a Cisco Unified IP Phone endpoint in your
network, your network must meet the following requirements:
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
Before You Begin, page 3-1
Footstand, page 3-9
Network Requirements, page 3-1
Cisco Unified Communications Manager Configuration, page 3-2
Working VoIP network:
VoIP configured on your Cisco routers and gateways
-
Cisco UnifiedCM installed in your network and configured to handle call processing
-
IP network that supports DHCP or manual assignment of IP address, gateway, and subnet mask
3
C H A P T E R
3-1