Epson 7800p - PowerLite XGA LCD Projector 제품 정보 매뉴얼 - 페이지 16

{카테고리_이름} Epson 7800p - PowerLite XGA LCD Projector에 대한 제품 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson 7800p - PowerLite XGA LCD Projector 22 페이지. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Epson 7800p - PowerLite XGA LCD Projector에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지), 운영 매뉴얼 (36 페이지), 빠른 설정 (2 페이지), 교체 부품 (1 페이지), 운영 매뉴얼 (47 페이지), 설치 매뉴얼 (5 페이지), 사양 시트 (2 페이지), 기술 요약 (7 페이지), 제품 지원 게시판 (25 페이지), 제품 지원 게시판 (22 페이지), 제품 지원 게시판 (28 페이지), 제품 지원 게시판 (41 페이지), 제품 지원 게시판 (15 페이지), 제품 지원 게시판 (22 페이지)

페이지 인쇄
Epson 7800p - PowerLite XGA LCD Projector 제품 정보 매뉴얼

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors
using the Status, Video Source, and Error icons shown below.
This lets you see which projectors are currently being used,
from which source (or port) they are projecting an image, and
if a problem occurs.
Status icon
Video Source icon
Note: To monitor a projector when it's in standby mode (plugged
in but not projecting), you must first select
setting in the projector's Advanced1 menu. You
Standby Mode
can monitor up to 64 projectors.
For detailed status information, select the projector and click
.
View details
The following tables explain the status, video source, and error
icons.
Status icons
(green)
Projecting; no problems
(dark)
Turned off; no problems
(green)
Projecting; problems detected
(dark)
Turned off; problems detected
Network error (for example, not connected to
network or power cable disconnected).
You may also see this error if Network OFF is
selected in Standby Mode.
Video source icons
Computer
BNC
S-Video
Error icon
as the
Network ON
5/03
EPSON PowerLite 7800p Projector
Video source icons
Video
DVI
Error icons
Lamp replacement notification (the lamp is
nearing the end of its life; see page 19)
High-speed cooling in progress (the
projector is getting too hot but continues to
operate)
Overheating (projection turned off
automatically)
Lamp out or lamp cover open
Fan error
Sensor error
Internal problem

Controlling Your Projectors

The control buttons in the upper-right of the EMP Monitor
screen let you turn the projectors on and off and select video
sources. (Hold the mouse pointer over a button to see a
description of its meaning.) Make sure you've selected the
projector(s) you want to operate before clicking one of the
buttons.
Note: To turn on a projector when it's in standby mode (plugged in
but not projecting), you first select
setting in the projector's Advanced1 menu.
Mode
EPSON PowerLite 7800p Projector
Control buttons
as the
Network ON
Standby
-
15