Cisco 7811 시작하기 - 페이지 2

{카테고리_이름} Cisco 7811에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7811 6 페이지. Mpp phones
Cisco 7811에 대해서도 마찬가지입니다: 매뉴얼 (27 페이지), 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (20 페이지), 재구성 매뉴얼 (2 페이지), 시작하기 (2 페이지), 빠른 참조 카드 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

Install Your New Phone (8800 Series) on Webex Calling (formerly Spark Call)

Procedure

Step 1

Plug the long, straight end of the handset cable into the phone and plug the other end into the handset.

Step 2

Connect the network cable from your network to the network port on the phone.

Step 3

Connect the footstand and adjust the angle of the phone.

a) Insert the curved connectors into the lower slots.

b) Lift the footstand until the connectors snap into the upper slots.

You may need to exert more force than you expect to connect or disconnect the footstand.

c) Adjust the angle of the phone.

Step 4

Plug in the external power supply.

Install Your New Phone (8800 Series) on Webex Calling

(formerly Spark Call)

Your phone comes with everything you need to power it up, connect it to the network, and set it up on your

desk.

To check which phone model you have, press Applications

number field shows your phone model.

If you'd like to see a graphic overview of these steps, see the

Procedure

Step 1

Plug the long, straight end of the handset cable into the phone and plug the other end into the handset.

Step 2

Connect the network cable from your network to the network port on the phone.

Step 3

Connect the footstand and adjust the angle of the phone.

a) Insert the connectors into the slots.

b) Press the footstand until the connectors snap into place.

c) Adjust the angle of the phone.

Step 4

Plug in the external power supply.

If your network provides Power over Ethernet (PoE), your conference phone comes with everything you need

to power it up, connect it to the network, and set it up on your desk. If your network does not provide PoE,

you need these additional supplies: a Cisco IP Conference Phone 7832 PoE Midspan Cable and a Cisco Power

Cube 3.

Get Started with Your New Phone

and select Phone information. The Model

Cisco IP Phone 8800 Series Installation

Guide.