Cisco 7832 매뉴얼 - 페이지 13

{카테고리_이름} Cisco 7832에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7832 30 페이지. Ip conference phone
Cisco 7832에 대해서도 마찬가지입니다: 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (21 페이지), 문제 해결 매뉴얼 (10 페이지), 매뉴얼 (22 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 (2 페이지), 빠른 시작 (2 페이지), 사용 설명서 (9 페이지), 빠른 참조 (2 페이지)

Your Phone

• An authorization code must always precede a billing code in the speed-dial string.

• A single comma is required between the authorization code and the billing code in the string.

• A speed-dial label is required for speed dials with authorization codes and additional digits.

Before you configure the speed dial, try to dial the digits manually at least once to ensure that the digit sequence

is correct.

Your phone does not save the authorization code, billing code, or extra digits from the speed dial in the call

history. If you press Redial after you connect to a speed-dial destination, the phone prompts you to enter any

required authorization code, billing code, or additional digits manually.

Example

To set up a speed-dial number to call a person at a specific extension, and if you need an authorization code

and billing code, consider the following requirements:

• You need to dial 9 for an outside line.

• You want to call 5556543.

• You need to input the authorization code 1234.

• You need to input the billing code 9876.

• You must wait for 4 seconds.

• After the call connects, you must dial the extension 56789#.

In this scenario, the speed-dial number is 95556543,1234,9876,,56789#.

Cisco IP Phone 7832 Buttons and Hardware

The following figure shows the Cisco IP Conference Phone 7832.

Phone Keypad

Characters, on page 15

Cisco IP Phone 7832 Buttons and Hardware

Your Phone