Cisco 7832 매뉴얼 - 페이지 9

{카테고리_이름} Cisco 7832에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7832 30 페이지. Ip conference phone
Cisco 7832에 대해서도 마찬가지입니다: 펌웨어 마이그레이션 마스터 매뉴얼 (31 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (21 페이지), 문제 해결 매뉴얼 (10 페이지), 매뉴얼 (22 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (39 페이지), 빠른 시작 매뉴얼 (2 페이지), 재구성 매뉴얼 (2 페이지), 빠른 시작 (2 페이지), 빠른 시작 (2 페이지), 사용 설명서 (9 페이지), 빠른 참조 (2 페이지)

Your Phone

Ways to Provide Power to Your Conference Phone

Your conference phone needs power from one of these sources:

• Power over Ethernet (PoE), which your network supplies.

• Cisco IP Phone Power Injector.

• A PoE Power Cable and Power Cube 3.

The following figure shows the PoE and PoE power cable power options.

Figure 1: Conference Phone Power Options

Connect to the Network

You need to connect the phone to the telephone network.

• Wired connection—The phone is plugged into the network using an Ethernet cable.

Onboard Your Phone with Activation Code

After your phone boots up, you will see a welcome screen where you can enter the activation code. If you

don't have an activation code, contact your administrator.

Before you begin

Your administrator provides you with a 16-digit activation code in the form xxxx-xxxx-xxxx-xxxx.

Procedure

Step 1

Enter your activation code in the field that is provided on the Welcome screen. You don't need to input the

hyphen (-) character when entering the code.

Step 2

Press Continue.

The phone completes the onboarding process automatically.

Step 3

If an error message displays, enter the code again or contact your administrator for a new code.

Auto Provision Your Phone with Short Activation Code

After your phone boots up, you see a welcome screen where you can enter the activation code. If you don't

have the activation code, contact your administrator.

Ways to Provide Power to Your Conference Phone

Your Phone