Siemens XC1005-A 운영 - 페이지 16
{카테고리_이름} Siemens XC1005-A에 대한 운영을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens XC1005-A 32 페이지. Extinguishing control unit
페이지 인쇄
Operation
4
Operation
Indicators
State
N° Color
1
Green
Fixed
2
Yellow
Fixed
Fast
3
Yellow
Slow
Fast
4
Yellow
Fixed
Slow
5
Yellow
Fast
6
Yellow
Fixed
7
Yellow
Slow
8
Red
Fixed
9
Red
Fixed
10
Yellow
Fixed
Slow
11
Yellow
Fixed
12
Yellow
Fast
13
Yellow
Fast
16
Building Technologies
Fire Safety
All display and control elements, except the 4-digit display for XC1001-A and
XC1003-A versions, are accessible to the operator:
LED 1 to 32 for operating conditions indication,
–
Keys 1 to 15 allowing:
–
to enter level 2 access code
operation (reset, disabled, test, etc.)
4-digit display allowing:
–
pre-warning time countdown
alarm counter
Fig. 3
User interface XC10xx-A
Description
The control panel is in operation
The control panel is not able to function any more
Fault on at least one component in the system
Mains fault
Batteries fault
Microprocessor fault
Jumper buzzer (X3 - XCM1002 board) not connected (remainder)
At least one component connected to the control panel is grounded
At least one component in the system is disabled
–
–
Calibration in progress or error
–
Programming in progress
At least one detection zone and/or extinguishing manual control is being tested
At least one detection zone is in alarm
Remote transmission activated
Level 2 operating access granted
System test activated
Mechanical blocking device is in the blocked position
Mechanical blocking device is in a wrong position
–
–
Selector valve is in a wrong position (used for multi-sector applications)
Loss of agent
A6V10257477_c_en_--
2012-06