Siemens XT55 GPS Startup 사용자 설명서 - 페이지 7
{카테고리_이름} Siemens XT55 GPS Startup에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens XT55 GPS Startup 13 페이지.
페이지 인쇄XT55 GPS Startup User's Guide
Confidential/Released
2 Getting started
Please ensure that the XT55 module connects properly to the application platform. In order
to prevent mechanical damage, be careful not to force, bend or twist the module.
2.1 Terminal emulator setup
The example below is based on the Windows HyperTerminal application (terminal emulator
program), but XT55 can also be configured using other terminal programs. The XT55 is used
with a PC running Windows 2000.
At the first power-up you can use the terminal software, which establishes the
communication with a modem via a RS-232 serial port. The following example uses the
Hyper Terminal program in Windows 2000.
On Windows 2000, start the Hyper Terminal program. Assign the name for a new session on
the displayed window (e.g. XT55).
Press the OK button and select a COM port.
XT55_GPS_startup_ug_V02a
Figure 1: Assign the name for a new session
Page 7 of 13
s
m
o b i l e
28.06.2004