Siemens CB675GB 1 Series 사용 설명서 - 페이지 22
{카테고리_이름} Siemens CB675GB 1 Series에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens CB675GB 1 Series 44 페이지.
페이지 인쇄
Appliance door
en
Attaching the rails
The rails only fit on the right or the left side. For both
rails, ensure that the curved rods are at the front.
First, insert the rail in the middle of the rear socket ‚,
1.
until the rail rests against the cooking compartment
wall, and push it back ƒ (figure
Then insert the rail into the front socket „, until the
2.
rail also rests against the cooking compartment wall
here, and press it downwards ... (figure
22
).
!
).
"
qAppliance door
W ith good care and cleaning, your appliance will retain
A p p l i a n c e d o o r
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
appliance door and clean it.
Removing and fitting the appliance door
For cleaning purposes and to remove the door panels,
you can detach the appliance door.
The appliance door hinges each have a locking lever.
When the locking levers are closed (figure
appliance door is secured in place. It cannot be
detached.
When the locking levers are open in order to detach the
appliance door (figure
"
cannot snap shut.
:
Warning
Risk of injury!
If the hinges are not locked, they can snap shut with
■
great force. Ensure that the locking levers are always
fully closed or, when detaching the appliance door,
fully open.
The hinges on the appliance door move when
Risk of injury!
■
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
Removing the appliance door
Open the appliance door fully and push it in the
1.
direction of the appliance.
Fold up the two locking levers on the left and right
2.
(figure
).
!
Close the appliance door as far as it goes ‚. With
3.
both hands, grip the door on the left- and right-hand
side and pull it up and out (figure
), the
!
), the hinges are locked. They
).
"