Siemens CM633GBS1B/20 사용 설명서 - 페이지 19
{카테고리_이름} Siemens CM633GBS1B/20에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens CM633GBS1B/20 48 페이지.
페이지 인쇄Notes
Slight differences in colour on the front of the
■
appliance are caused by the use of different
materials, such as glass, plastic and metal.
Shadows on the door panels, which look like
■
streaks, are caused by reflections made by the
interior lighting.
Enamel is baked on at very high temperatures.This
■
can cause some slight colour variation. This is
normal and does not affect operation.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
This does not impair the anti-corrosion protection.
Keeping the appliance clean
Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
Tips
Clean the cooking compartment after each use. This
■
will ensure that dirt cannot be baked on.
Always remove flecks of limescale, grease, starch
■
and albumin (e.g. egg white) immediately.
Use the universal pan for baking very moist cakes.
■
Use suitable ovenware for roasting, e.g. a roasting
■
dish.
pRails
With good care and cleaning, your appliance will retain
R a i l s
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
shelves and clean them.
Detaching and refitting the rails
:
Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Detaching the rails
Push the rail to the front and up (fig.
1.
and detach it (fig.
2.
"
)
!
).
Then swing the entire rail outwards
3.
at the rear
(fig.
).
ƒ
#
Clean the rails with cleaning agent and a sponge. For
stubborn deposits of dirt, use a brush.
Inserting the holders
If the holders fall out when you remove the rails, these
must be re-inserted.
The holders at the front differ from those at the rear
1.
(fig.
).
!
Use the hook to mount the front holder at the top
2.
into the round hole
‚
it at the bottom, and straighten it
Use the hook to attach the rear holder into the upper
3.
hole
‚
and push it into the lower hole
Attaching the rails
When hanging the rails, ensure that the sloping edge is
at the top of the rail.
Rails
and detach it
‚
, set it at a slight incline, attach
(fig.
).
ƒ
"
ƒ
(fig.
en
).
#
19