Siemens CM678G4.6B 사용자 설명서 및 설치 지침 - 페이지 23

{카테고리_이름} Siemens CM678G4.6B에 대한 사용자 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens CM678G4.6B 48 페이지.

페이지 인쇄

Download the Home Connect app.

Open the Home Connect app and scan the follow-

ing QR code.

16.2 Home Connect Settings

You can adjust the settings and network settings for Home Connect by going to your appliance's basic settings.

Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance

is connected to your home network.

Basic setting

Wi-Fi

Network

Connect to app

Remote control

Appliance information -

16.3 Operating the appliance with the

Home Connect app

When the Remote start function is activated, you can

use the Home Connect app to remotely configure the

appliance's settings and start it.

Note: Some operating modes can only be started on

the oven itself.

Requirements

¡ The appliance must be switched on.

¡ The appliance must be connected to your home net-

work and to the Home Connect app.

¡ To configure the appliance's settings using the

Home Connect app, "Remote control" must be

switched on in the basic settings. When the Remote

start function is deactivated, only the appliance's op-

erating statuses are displayed in the Home Con-

nect app.

Tap

⁠ .

Tap "Remote start".

a The display will show ⁠ .

Configure a setting in the Home Connect app and

send it to the appliance.

Notes

¡ If you open the appliance door within 15 minutes

of activating the Remote start function or of the

set program ending, the Remote start function

will be deactivated.

Possible settings

Switch on

Switch off

Connect to network

Disconnect from network

Off

Follow the instructions in the Home Connect app.

Explanation

If Wi-Fi is activated, you can use Home Connect.

In networked standby mode, the appliance requires a max-

imum of 2 W.

If you disconnect the appliance from the network, all network

information will be deleted. This setting is useful if you have

new login details for the router.

This setting initiates the connection between the Home Con-

nect app and the appliance.

When this function is deactivated, all you can do is view the

appliance's operating status in the app.

When this function is activated, you can remotely start and

control the appliance.

The display shows information about the network or the appli-

ance.

¡ When you start the oven using the controls on

the appliance itself, the Remote start function is

activated automatically. You can use the

Home Connect app to adjust the settings or start

a new program.

16.4 Software update

Your appliance's software can be updated using the

software update function, e.g. for the purposes of op-

timisation, troubleshooting or security updates.

To do this, you must be a registered Home Con-

nect user, have installed the app on your mobile device

and be connected to the Home Connect server.

As soon as a software update is available, you will be

informed via the Home Connect app and will be able to

start the software update via the app. Once the update

has been successfully downloaded, you can start in-

stalling it via the Home Connect app if you are in your

local area network. The Home Connect app will inform

you once installation is successful.

Notes

¡ You can continue to use your appliance as normal

while updates are downloading. Depending on your

personal settings in the app, software updates can

also be set to download automatically.

¡ We recommend that you install security updates as

soon as possible.

Home Connect en