Siemens HB 78 B Series 사용자 설명서 및 설치 지침 - 페이지 10
{카테고리_이름} Siemens HB 78 B Series에 대한 사용자 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens HB 78 B Series 36 페이지.
Siemens HB 78 B Series에 대해서도 마찬가지입니다: 사용자 설명서 및 설치 지침 (36 페이지)
페이지 인쇄
en Basic operation
Keep the room ventilated while the appliance is
3.
heating.
Set the type of heating and temperature.
4.
→ "Basic operation", Page 10
Type of heat-
3D hot air
ing
Temperature
Maximum
Cooking time
1 hour
7 Basic operation
7.1 Switching on the appliance
Turn the function selector to any position other than
▶
the "Off" position .
a The appliance is switched on.
7.2 Switching off the appliance
Turn the function selector to the "Off" position .
▶
a The appliance is switched off.
7.3 Setting the type of heating and
temperature
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
a The appliance starts heating after a few seconds.
a Depending on the appliance type, rapid heating
automatically switches off for set temperatures of
200 °C and above for certain types of heating.
→ "Rapid heating", Page 10
8 Rapid heating
To save time, rapid heating can shorten the preheating
time for set temperatures over 100 °C.
Rapid heating is possible for the following types of
heating:
¡ 3D hot air
¡ Top/bottom heating
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
10
Switch off the appliance after the specified cooking
5.
time.
Wait until the cooking compartment has cooled
6.
down.
7.
Clean the smooth surfaces with soapy water and a
dish cloth.
Clean the accessories using soapy water and a dish
8.
cloth or soft brush.
When your food is ready, switch off the appliance.
3.
Tips
¡ The most suitable type of heating for your food can
be found in the description of the type of heating.
→ "Types of heating and functions", Page 6
¡ You can also set a cooking time and end time on
the appliance.
→ "Time-setting options", Page 11
Changing the type of heating
You can change the type of heating at any time.
Use the function selector to set the required type of
▶
heating.
Changing the temperature
You can change the temperature at any time.
Use the temperature selector to set the required
▶
temperature.
Set a suitable type of heating and a temperature of
1.
at least 100 °C.
Rapid heating automatically switches off at temper-
atures of 200 °C and above.
If rapid heating does not switch off automatically,
2.
press the
button.
a
appears in the display.
a Rapid heating starts after a few seconds.
a Once rapid heating has ended, a signal tone
sounds and the
symbol goes out on the display.
Place the food in the cooking compartment.
3.
Cancelling rapid heating
Press the
button.
▶
a The
symbol disappears from the display.