ActronAir WRE-050CS 소유자 매뉴얼 - 페이지 8
{카테고리_이름} ActronAir WRE-050CS에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ActronAir WRE-050CS 16 페이지. Wall hung systems
ActronAir WRE-050CS에 대해서도 마찬가지입니다: 설치 및 설정 매뉴얼 (16 페이지)
페이지 인쇄
•
Sleep Operation
The SLEEP function is used to decrease energy
Owner's Manual
use while you sleep (and don't need the same
temperature settings to stay comfortable). This
function can only be activated via remote control.
03.06. Sleep Operation
Press the SLEEP button when you are ready to
The SLEEP function is used to decrease energy usage while you sleep and do not need the same temperature
go to sleep. When in COOL mode, the unit will
settings to stay comfortable. This function can only be activated via the remote control.
increase the temperature by 1°C (2°F) after 1
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the unit will increase the
hour, and will increase an additional 1°C (2°F)
temperature by 1°C after 1 hour, and will increase an additional 1°C after another hour. When in HEAT mode, the
after another hour. When in HEAT mode, the unit
unit will decrease the temperature by 1°C after 1 hour, and will decrease an additional 1°C after another hour.
will decrease the temperature by 1°C (2°F) after
1 hour, and will decrease an additional 1°C (2°F)
It will hold the new temperature for 7 hours, then the unit will turn off automatically.
after another hour.
NOTE
It will hold the new temperature for 7 hours, then
The SLEEP function is not available in FAN or DRY mode.
the unit will turn off automatically.
Note: The SLEEP function is not available in
FAN or DRY mode.
Set
Set
Temperature
temperature
8
SLEEP Operation
SLEEP Operation
±1°C
±1°C
+/- 1 C/2 F
+/- 1 C/2 F
1hr
1hr
Saving energy during sleep
Saving Energy During Sleep
Fig. 3.1
Owner's Manual - Wall Hung Split System
Doc. No.9590-4011 Ver. 2 210622
Wall Hung Split System
7 hours
7 hours
Timer Off
timer o
Page 10