Siemens IQ500 HB 58 C 6B Series 사용자 설명서 및 설치 지침 - 페이지 36
{카테고리_이름} Siemens IQ500 HB 58 C 6B Series에 대한 사용자 설명서 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Siemens IQ500 HB 58 C 6B Series 40 페이지.
페이지 인쇄
en Installation instructions
An all-pole isolating switch must be integrated into the
permanent electrical installation according to the install-
ation regulations.
Identify the phase and neutral conductors in the
1.
socket.
The appliance may be damaged if it is not connec-
ted correctly.
Connect the hob in accordance with the connection
2.
diagram.
See the rating plate for the voltage.
Connect the wires of the mains power cable accord-
3.
ing to the colour coding:
Green/yellow = Protective conductor
‒
Blue = Neutral conductor
‒
Brown = Phase (external conductor)
‒
25.7 Installing the appliance
Slide the appliance in fully and centre it.
1.
Screw the appliance into place.
2.
36
For handleless kitchens with vertical bar handle
3.
strips:
Attach a suitable filling piece
‒
any sharp edges and to guarantee a safe install-
ation.
Pre-drill aluminium profiles to establish a screw
‒
connection
.
Secure the appliance using a suitable screw
‒
Note: The gap between the worktop and the appliance
must not be closed by additional battens.
Thermal insulation strips must not be fitted to the side
panels of the surround unit.
25.8 Removing the appliance
Disconnect the appliance from the power supply.
1.
Undo the fastening screws.
2.
3.
Lift the appliance slightly and pull it out completely.
in order to cover
.